The Pro-Clean Whirpool Flush 3-pack includes 3 x 475ml (16oz) bottles of Bio-degradable hot tub pipe cleaner that dissolves accumulated body oils, scum, mould, Bio-Film and other debris from you spa or jetted bath tubs plumbing liners. Aids in the prevention of build-up in the plumbing lines of spas and jetted bath tubs. Eliminates blocked or obstructed jets.
Over time, accumulations of body oils, cosmetics, lotions, chemicals, dirt and debris build-up on the INSIDE of the spa's circulation system. Not only does this cut the running efficiency of your spa's pump, but it also interferes with heater's effectiveness as well.
Use prior to draining the spa. This product was previously called Whirl-O-Clean but has been rebranded. Same great product!
Manufacturers Directions.
For hot tubs.
Close air controls. Remove filter cartridge. Pour ½ bottle of Pro-Clean Whirlpool flush per 1,000 litres (220 Gallons) into hot tub water before draining. Turn jets on high and run jets for about one (1) hour. Drain hot tub and resume with normal maintenance procedure. Do Not Use Hot Tub while Pro-Clean is in the water.
Whirlpool baths:
Close air dials. Pour 1/3 bottle of Pro-Clean Whirlpool rinse into whirlpool filled with hot water. Turn tub on for 15 minutes. Drain tub and wipe down with a cloth dampened with Pro-Clean. Do Not Use Whirlpool with Pro-Clean in the water.
