Balboa BP100 Bundle with 5.5KW heater and the larger oval shaped 6 button TP600 topside control panel is an ideal basic spa control system. The 5.5KW heater offers higher heat output and typically keeps the hot tub water temperature at the set point during use in the colder winter months. This compact feature-rich hot tub control system is ideal for retrofitting in basic spas with 1 or 2 pumps.
Can run:
- 1 - 2 speed pump 240V (Max 12.0 Amps)
- Ozonator 120V or 240V
- Dedicated circulation pump (min 23 GPM and 1-1/2" plumbing ) 240V
(Pump 1 can only be single speed for circ pump option) - 2nd single speed pump or blower 240V (Max 12.0 amps)
- 12V light
- Balboa ControlMySpa wifi compatible (Sold Separately)
Whats Included:
- 1 x G5310 BP100G2 System with 5.5KW heater
- 1 x TP600 Topside control panel. 7.1" (18.03cm) x 3.5" (8.89cm)
- 1 x Topside control panel overlay (Jets1/Jets2/Aux/Warm/Light/Cool buttons)
- 1 x Topside control panel adaptor plate 9" (22.86cm)x 4" (10.16cm)
- 1 x Light cord, 8'
Product Note.
The Balboa BP100G2 is factory configured for 240 volt applications.
Manuals:
Warranty Coverage: Balboa VS packs/bundles and BP series packs/bundles come with a twelve (12) months limited manufacturer's warranty from the date of purchase that covers defects in workmanship and materials. This warranty will be void if these parts are damaged due to improper installation or use or if the damage is from exposure to water or electrical power surges. The warranty does not cover any labour charges, the cost of lost water or chemicals, or any other possible damages. Not suitable for salt water applications, voids warranty.
IMPORTANT. Terminal block screws need to be tightened to torque to the specs listed on the inside cover of the pack. Failure to tighten properly can cause heat/resistance arc burn damage to the circuit board. The manufacturer will not honour the limited product warranty if these connection points are burned.
