The Balboa BP7 spa pack with the high output heater rated at 5.5KW comes bundled with the compact 4 button TP200 topside control, which is an ideal retrofit option for spas with tight space for the topside and 1 or 2 jet pumps.
Balboa BP7 Power Pack:
- Power: 220 - 240 volts 60HZ
- Heater: 5.5KW heater
- Can operate:
- Pump 1 - 1 or 2 speeds, Max 12.0 amps (Default setting 2 speed, can be changed)
- Pump 2 - 1 or 2 speeds, Max 12.0 amps - - Dedicated circulation pump, (min 23 GPM and min 1.5" plumbing required)
- Ozonator - M7 Patented Sensor heater technology
- Wifi: Compatible with Balboa ControlMySpa WiFi (Sold Separately)
- Balboa Bluetooth Audio compatible, module 59089 sold separately
- Spa light control 1 Amp max
Whats included:
- 1 x Balboa Spa pack BP7 P/N G5361 (5.5W Heater)
- 1 x TP200 topside control Face size W=4.34" (11.04cm) x H=1.58" (4.03cm)
- 1 x Adaptor plate (Bezel) 9" x 4"
- 1 x Cord for light, 10' long
TP200 Buttons for 1 or 2 pump set up:
The buttons on the TP200 are labeled : Temp, Jets, Lights, Aux.
In spas with 2 pumps for the jets the TP200 button functionality will use the Aux for pump #2.
The industry leader for reliability, durability and serviceability, the new BP7 system has a replaceable single circuit board configuration, replaceable heater featuring the quick connect heater plug system and both sensors are individually replaceable.
Important.
This is a retrofit bundle that can replace other control systems and installation by a qualified person is recommended.
Electronic Parts Return Policy.
All Balboa Spa Control systems we sell are shipped factory new and factory tested. Balboa Spa Control Systems and electronic parts are non-returnable as they cannot be resold. For further information, please refer to our return policy. All Balboa products come with the original manufacturer's warranty.
Warranty Coverage: Balboa VS packs/bundles and BP series packs/bundles come with a twelve (12) months limited manufacturer's warranty from the date of purchase that covers defects in workmanship and materials. This warranty will be void if these parts are damaged due to improper installation or use or if the damage is from exposure to water or electrical power surges. The warranty does not cover any labour charges, the cost of lost water or chemicals, or any other possible damages. Not suitable for salt water applications, voids warranty.
IMPORTANT. Terminal block screws need to be tightened to torque to the specs listed on the inside cover of the pack. Failure to tighten properly can cause heat/resistance arc burn damage to the circuit board. The manufacturer will not honour the limited product warranty if these connection points are burned.
