This advanced feature rich Balboa retrofit bundle with M8 artificial intelligence is ideal for hot tubs with 1 to 3 jet pumps plus it can also run a dedicated Iron Might or Circ Master circulation pump* in spas that have it. The Balboa BP7 is one of the most feature and programming flexible spa control systems that is also compatible with the Balboa UltraGateWay wifi system sold separately.
BP7 features:
- Model BP7 G4361
- 220 - 240 volts 60HZ only, cannot run on 120 volts,
- 230v Control for primary 1 or 2 Speed Pump (Max 12 AMPS)
- 230v Control for 2nd 1 or 2 Speed Pump* (Max 12 AMPS)
- 230v Control for 3rd and 4th 1 Speed pump* (Max 10 AMPS)
- 230v dedicated circulation pump* option
- 230v ozone circuit
- Heater size 5.5kW
- Spa light 12VAC 1A max
- Wifi: Compatible with Balboa ControlMySpa WiFi (Sold Separately)
- M8 artificial intelligence for efficiency
- M7 patented temperature & flow sensor technology
- Canadian safety approvals
TP700 Colour Screen Topside Control Panel
The TP700 topside control panel gives you access to all the advanced features of the BP7 from heat modes, M8 artificial intelligence setting, system information, diagnostics and performance fault log, all at your finger tips. (Ships with Blue overlay)
☞ Browse the complete user guide for full details (pdf manual)
- Vibrant screen display, 2x brighter than the older models
- Highly resistant to water splashes or contamination
- New, bigger, brighter & bolder menus
- Provides stunning clarity and a premium true colour display
- Face size is 10 inches (25.4cm) wide x 3.5 inches (8.89cm)
Whats included:
- Balboa BP7 control pack with 5.5KW heater P/N G5361
- Balboa TP700 Keypad with 3 pump overlay, 6ft cord P/N 57278
- 2 wire cord for standard light, 10ft
- Lifetime technical support (Phone, Text and email)
* The BP7 requires a minimum of 23 gallons a minute flow rate for the heater to work. It is the installers responsibly to confirm the hot tub plumbing and pump meets this requirement.
Electronic Parts Return Policy.
All Balboa Spa Control systems we sell are shipped factory new and factory tested. Balboa Spa Control Systems and electronic parts are non-returnable as they cannot be resold. For further information, please refer to our return policy. All Balboa products come with the original manufacturer's warranty.
Warranty Coverage: Balboa VS packs/bundles and BP series packs/bundles come with a twelve (12) months limited manufacturer's warranty from the date of purchase that covers defects in workmanship and materials. This warranty will be void if these parts are damaged due to improper installation or use or if the damage is from exposure to water or electrical power surges. The warranty does not cover any labour charges, the cost of lost water or chemicals, or any other possible damages. Not suitable for salt water applications, voids warranty.
IMPORTANT. Terminal block screws need to be tightened to torque to the specs listed on the inside cover of the pack. Failure to tighten properly can cause heat/resistance arc burn damage to the circuit board. The manufacturer will not honour the limited product warranty if these connection points are burned.
