Rebuild kit for the Beachcomber Hush Pump circulation pump wet end. Rebuilding a Hush Pump wet end is ideal if the electric motor shaft is still in good condition and is not severely corroded. Kit also fits the Aqua-Flo Circ-Master pumps starting with model number 0209... does not fit Circ-Master model numbers starting with 0259...
Kit includes:
- Wear ring,
- Hi Flo Impeller, P/N 91693655
- Pro grade seal suitable for ozone and salt water applications,
- O-Ring for faceplate,
- Small tube of PTF base gasket lube for the O-ring
The Hush Pump is a 48 frame circulation pump used in many Beachcomber hot tubs and is made by Aqua-Flo. The Hush Pump is 1/15 HP runs on 230 volts and has 1-1/2" intake and discharge unions with a side discharge wet-end.
This kit contains the parts that are typically required to rebuild a Hush Pump wet end that has had the shaft seal leaking for some time and water has has made its way into the impeller nut on the shaft. The impeller is threaded onto the shaft at standard thread but if the shaft seal has leaked for sometime if will be difficult to remove and may break when attempting to remove it.
*If the pump has been leaking for some time and water has made its way into the bearings, new bearings may be required. Bearings are not included in the kit. Depending on when your pump was made it can have different sizes of bearings, we recommend disassembling the pump and measuring the bearings inner and outer diameter to determine the correct replacement.