Hayward Vari-Flo Valve SP0710X32 is designed to fit only the Hayward S200 & S240 2 piece tank sand filters with 1.5″ plumbing ports. It is a replacement and upgrade that will retrofit on any filter that has an SP071113 valve. Pressure gauge not included, sold separately.
Hayward Vari-Flo 1.5 Valve SP0710X32 Functions:
- Filter – For normal filtering and regular vacuuming
- Backwash – For cleaning filter sand bed of accumulated debris
- Rinse – Use after completing backwash cycle to ensure all dirty water is rinsed out of the filter to waste
- Waste – By-passes the filter for draining or lowering pool water level and for vacuuming heavy debris directly to waste line.
- Recirculate – Water is recirculated through the valve by-passing the filter
- Closed – Shuts off the flow from the pump to the filter
Dimensions:
- Valve Port Center Line spacing: 5″
Markings:
- SP710XA-13 stamped into valve body below the pump port. S-200-N stamped into side of the sweep elbow. S 200 P stamped into side filter connection.
Also replaces:
- CMP 27512-154-000
- Praher SM1-HP3
⚠️ IMPORTANT
This Hayward valve looks identical to the SP0710X64 valve used on the Hayward sand filters with 1 piece tank but is not interchangeable, the union spacing on this valve is five (5) inches O/C and the SP0710X64 is six (6) inches O/C.