The Madimack inverECO is rated for up to 66,000 btu featuring a stepless DC Inverter allowing full control over the speed of the compressor and fan motor. The InverECO heat pump will adjust precisely and intelligently to the heat demand of your inground swimming pool to maintain stable temperature throughout the season.
Energy Savings
The InverECO heat pump runs at full speed at the beginning of the season to heat your pool faster. Once close to reaching set temperature, it will adjust to low-speed operation and maintain stable temperature throughout the season. InverECO will achieve double energy saving compared to single speed On/Off heat pumps.
Features:
Soft Start
The InverECO heat pump will start from 0 amps and increase steadily protecting electrical systems.
Operation down to 32°F (-0°C)
Built to operate in cold weather to extend your pool season into the winter.
Built-in Wifi
Built-in Wi-Fi and smart app provides convenience to control your pump on-the-go.
Boost & Silence
Switch between Boost mode to heat your pool faster, and Silence mode when quieter operation is preferred.
Twin-rotary Inverter Compressor
Significantly reduced operating noise.
Electronic Expansion Valve
Optimized flow of refrigerant 20% higher COP.
Twisted Titanium Heat Exchanger
Increased area for heat exchange 40% higher efficiency.
Installation
Not compatible with soft sided pools, installation by licensed technician is required.
Manuals
Ultra Quiet Solution
Thanks to Madimack's Sound Shield Technology.
*Curbside delivery service provides delivery of your heat pump to the street curb at the end of your driveway. This service does not include set up, installation or assembly or removal of packaging materials.
Your item will be shipped to the local delivery terminal:
- The delivery terminal will call you when your item arrives to schedule a delivery appointment.
- Deliveries are typically made between the hours of 8:00 am and 5:00 pm Monday to Friday and will be scheduled with in a 4 hour window.
- Your heat pump will be delivered on a lift gate truck and will be taken off the truck by the driver.
- Upon delivery please inspect your heat pump. You will be required to sign proof of delivery receipt. Please list any damage to the items packaging on the delivery receipt or, if refusing the delivery due to damage, please note "refused due to damage" on the receipt.
- A signature is required for all deliveries; the driver is unable to complete the delivery without a signed delivery receipt.
Manufacturers limited warranty.
Heat Exchanger
25 Year limited warranty
Compressor
5 Year limited warranty
On all parts
3 Year limited warranty
The warranty does not cover damage caused by improper water chemistry. The warranty will be void if the heater is not installed by a licensed technician, or the heater has been installed on a soft sided pool. Please see product manual for specific warranty details.
| PERFORMANCE CONDITION: | Air 80°F/ Water 80°F/ Humidity 80% |
| Heating capacity (BTU): | 66,000 |
| Heating capacity (KW): | 19 |
| COP Range: | 11.6 ~ 6.2 |
| PERFORMANCE CONDITION: | Air 80°F/ Water 80°F/ Humidity 63% |
| Heating capacity (BTU): | 61,000 |
| Heating capacity (KW): | 18 |
| COP Range: | 11.1 ~ 5.8 |
| PERFORMANCE CONDITION: | Air 50°F/ Water 80°F/ Humidity 63% |
| Heating capacity (BTU): | 28,000 |
| Heating capacity (KW): | 8 |
| COP Range: | 6.2 ~ 5.0 |
| TECHNICAL SPECIFICATIONS: | . |
| Advised pool volume (gallons) *: | ≤18,000 |
| Operating air temperature (°F): | 32 ~ 109 |
| Operating air temperature (°C): | 0 ~ 42 |
| Heat exchanger: | Titanium in PVC |
| Power supply: | 230V/1 Ph/60Hz |
| Water connection (mm)/(inch): | 48.3mm/1.5" |
| Rated input power at air 80°F (kW): | 0.54 ~ 3.37 |
| Rated input power at air 80°F (BTU): | 1900 - 11500 |
| Rated input current at air 80°F (A): | 2.35~14.65 |
| Maximum input current (A): | 16.8 |
| Sound level at 10ft dB(A) LP: | 38.4 ~ 47.1 |
| Advised water flux: | 28.5 ~ 37.5 GPM |
| Net dimension LxWxH: | 37.8" × 15.6" × 25.9" |
| Net Weight: | 134.5 lbs |
| Installation: | installation by licensed technician is required, |
