Mineraluxe pH plus is an alkaline mineral that quickly raises the pH in hot tub water. pH level between 7.4 and 7.8 prevents corrosion and scale-formation in hot tubs and swim spas, allows sanitizers to work more efficiently and is mainly responsible for the overall water comfort.
When to use & how much:
- Test hot tub or swim spa water on fresh fill and as needed thereafter
- Apply as needed to maintain pH between 7.4 – 7.8
- Dosage rate is based on how much the pH is to be raised:
- - If pH is 7.3 – use 6 grams per 1,000 L
- - If pH is 7.2 – use 12 grams per 1,000 L
- - Lower than 7.2 – use 24 grams per 1,000 L
- 1 capful = 10 grams (approx.)
- Never add more than 25 g per 1,000 L per application
How to use:
- Always adjust alkalinity first, before pH or calcium hardness
- Run pumps with air controls turned off
- Apply product by sprinkling slowly over water surface in one application
- Circulate for 1 – 2 hours
- Re-test to confirm proper pH or add more if pH is still below 7.4
