Spa Purge attacks the buildup of organic waste including body oils, lotions, cosmetics, hair products and other contaminants.
- Product: Spa Purge
- Size: 1L
- organic build up can produce cloudiness, odours, and foaming in spa water
- helps clean organic waste from unreachable places inside spa plumbing
- Can be used in spas, hot tubs, and jetted baths
Directions for use:
Spas/Hot Tubs:
- Remove filter cartridge(s)
- With spa water temperature at 35ºC or higher and circulation running, add entire contents of bottle to spa water.
- Run jets for a minimum of 5 minutes. Note: If foaming becomes excessive, turn jets off. Some foaming is expected during the purge process.
- Maintain water temperature at 35ºC+ and allow spa to circulate overnight with jets off.
- Drain and rinse/clean out the surfaces of the spa. Refill the spa water and reinstall the filter elements.
- Proceed with normal spa maintenance.
For Jetted Tubs:
- Fill tub with hot water 1" above the jets.
- Add 1/2 bottle of Spa Purge.
- Turn jets on for 5 minutes (some foaming will occur).
- Turn jets off and let sit for at least 5 hours.
- Turn jets on to flush the system.
- Drain tub & clean surface as needed.