The Taylor Technologies K-1004 Pool Test Kit will test for 4 parameters, chlorine / bromine, pH + acid demand, total alkalinity (DPD). With the K-1004 you can meter the amount of buffer capacity in the water, your total alkalinity, by titrating the buffer capacity out using an acid. Total alkalinity helps keep your water’s pH in line by allowing the buffer to be affected by changes before the pH changes. Pool and hot tub water uses sodium bicarbonate to buffer the pH.
Range
- pH: 6.8-8.2
- Total Chlorine: 0.5 ppm -5 ppm
- Total Bromine: 1 ppm – 10 ppm
- Total Alkalinity: Ideal Range 80-120, acceptable range 80-150
Number of tests:
- Chlorine/Bromine 105 tests
- pH 105 tests
- Total Alkalinity: Ideal Range 80-120, at 100 ppm you would have 52 tests
For Accurate Test Kit Results:
- Keep test kits and reagents in the right condition, keep them in a cool, dark place away from other chemicals
- Keep test kits and reagents out of direct sunlight
- Test kits and reagents should be kept at room temperature or colder (2 -29 C), keep them out of extreme temperatures
- Make sure the lid securely fastened, as well as all caps secured tightly on the reagent bottles
- Keep out of reach of children, SDS’ are available upon request
- Make sure the colour comparator is in good condition. Check for cracks, faded colour swatch
- If the comparator is cloudy, a light acid solution usually cleans them up, if not a new comparator is needed
- Avoid contamination by not interchanging cap of the reagent bottles
- Wipe, clean and dry all equipment after use
- When comparing the colour of the sample against the known colour swatch, use day light opposed to indoor light
Manuals :
Usage Instructions (pdf)
