Current style replacement impeller for Waterway Executive 56 or Executive 48 series pump. This impeller is used in both the Executive 56 series and Executive 48 series wet end. See important details on old and current style impellers below. When replacing the impeller it is a good practice to replace the pump seal at the same time to ensure trouble free performance of the pump.
Impeller details:
- 2.0 HP in the Waterway Executive 56 pump
- 3.0 HP in the Waterway Executive 48 pump
- Fits Executive 56 and 48 series side discharge Waterway pumps*
- Waterway part number 310-4210
- Ships in black which is the current generation as produced by Waterway, the grey coloured ones are no longer available and have been replaced by the current generations black ones,
- Made by Waterway
- This impeller uses the R3865 pump seal, sold separately here
* Important note about Waterway Executive series impellers.
Smooth nose impellers (Old Style) as shown below on the left are no longer available. The current style impellers shown below on the right with the stepped nose are not a compatible replacement for the old style impeller and will not fit in the old style wet end hosing. If you need to replace an old style impeller a complete current style wet end will need to be purchased.
