This top centre discharge pump from Waterway comes with the 1.5" intake and discharge which measure 2-3/8" outside to outside threads. Available only in the Executive 48 series from Waterway this pump is suitable and used in many smaller hot tub models.
Pump details:
- 1.5 HP Waterway centre discharge hot tub pump, 2 Speed 48 frame,
- Waterway OEM part # 3420620-15,
- 1.5" intake and 1.5" discharge, measures 2-3/8" outside to outside on the threads.
- 230volt, 8 Amps high speed (3450 RPM) and 2.6 Amps low speed (1725 RPM).
- Viton pump seal for ozone and salt hot tubs
- New cord and unions not included, sold separately.
Orientation of wet end.
Pump wet end can be oriented in 90 Degree increments, up, left or right as shown in illustration on the right. Pump will ship with discharge directed up. To change the discharge orientation, loosen the pump's four through bolts from the back of the motor and pull them back enough to disengage. Then rotate the wet end to the desired position, realign and re-tighten the bolts.
Important
Determine the pump plumbing size by measuring the outside diameter of the wet end male threads. Plumbing sizes for hot tubs are nominal, and not actual outside diameter (O.D.) of the the threaded intake or discharge. Once you have removed the pump, use a tape measure to check your old pump thread size and compare to the sizes below.
If your pump thread O.D. is (approx.) 2 3/8", Then you'll need a pump with union size 1 1/2".
If your pump thread O.D. is (approx.) 3.0", Then you'll need a Pump with union size 2.0".
If your pump thread O.D. is (approx.) 3 5/8", Then you'll need a Pump with union size 2 1/2".
If your pump thread O.D. is (approx.) 3.0", Then you'll need a Pump with union size 2.0".
If your pump thread O.D. is (approx.) 3 5/8", Then you'll need a Pump with union size 2 1/2".
Please note!
Some brands of hot tub spa pumps have non-standard threads and use fitting sizes with different dimensions. These brands are: Hayward, Jacuzzi and sta-rite.
Some brands of hot tub spa pumps have non-standard threads and use fitting sizes with different dimensions. These brands are: Hayward, Jacuzzi and sta-rite.
Great Canadian prices aside, buying from Pool and hot tub depot in Canada provides access to one thing you can't get anywhere else: our expert technical support. Installation questions or need assistance finding a compatible replacement part? We're here to help!
Manufacturers 1 year limited warranty.
